P25Link Software

Under Construction!

Easy install:

# To setup the P25Link software for yor Quantar or DIU 3000, you will need to install a fresh Debian image on your Raspberry Pi.

# Next, log to it using SSH.

# Run the following coomands:

cd /opt

# Download the current p25link_2.xx-x.deb file using the following command:

sudo wget https://github.com/Wodie/p25link/raw/master/installer/p25link_2.30-3.deb

# Install it with the following command:

sudo apt install /opt/p25link_2.30-3.deb

# To configure, run the main menu run:

sudo /opt/p25link/p25link-menu

READ what you are asked to input.

# To test app run:

sudo /opt/p25link/p25link

Source code install:

# If you want to dig into the code and get your hands dirty, you can download the github repo at:

https://github.com/Wodie/p25link

 

Terms of Use

A few things to know...

The whole project is intended for Amateur Radio use only. You agree not to use the P25Link system or any components in any public safety application. This does not preclude normallly accepted amateur radio support for emergency operations.

P25Link and it's operators shall in no event be liable for any direct, indirect, punitive, incidental, or special consequential damages to property or life whatsoever arising out of, or connected with, the use of the P25Link system.

Motorola, Quantar, and their associated logos are registered trademarks of Motorola Solutions Inc.

Yaesu, Fusion, and their associated logos are registered trademarks of Yaesu co.

This site and the P25Link System are not associated with Motorola or any other manufacturer in any way.